plustek: Canon 1240 U
Subject:
Re: Canon 1240 U
From:
Theodore Kilgore ####@####.####
Date:
14 Oct 2002 18:46:05 -0000
Message-Id: <Pine.LNX.4.44.0210141214150.25170-100000@banach.math.auburn.edu>
Gerhard,
It may help to know that the CD (and the written manual!) which come with
the N670U are apparently identical to the CD and written manual which
come with the N1240U. At least, along with my N670U the manual and CD
offered support equally to the N1240U, too.
Based upon this, I strongly suspect that the differences between the two
scanners are minor indeed: that the two scanners differ in the in the USB
product ID number and in little else. No doubt, also some of the features
of the N1240U (such as higher resolution, as an obvious one) are disabled
or turned off in the N670U.
However, I do not have an N1240U, and I have not opened my N670U, either.
I only have that report from you back in January or February that someone
else has opened the N670U and found an LM9833 inside.
Theodore Kilgore
On Mon, 14 Oct 2002, Gerhard Jaeger wrote:
> On Sonntag, 13. Oktober 2002 16:39, Karlo wrote:
> > Hallo
> >
> > it was great to find the information
> > that you work on a scanner driver
> > based on a lm9833 USB Chip.
> >
> > Do you have a mailing list, when a driver
> > for this scanner is available.....
> >
> > i am just ja newbe in linux with a suse 8.1 installation
> >
> > Karlo
>
> You are already on the list ;-)
> In general the 1240 should work somehow, but at least
> I need someone who owns this scanner (at least you) and
> who is willing or able to tweak the plustek driver code that
> the scanner works...
>
> Gerhard
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: ####@####.####
> For additional commands, e-mail: ####@####.####
>
