plustek: 12000P Detected incorrectly?
Subject:
12000P Detected incorrectly?
From:
####@####.#### ####@####.####
Date:
18 Oct 2002 01:34:19 -0000
Message-Id: <1034904647.6898.14.camel@moxie>
xm@moxie:~$ uname -a
Linux moxie 2.4.18-bf2.4 #1 Son Apr 14 09:53:28 CEST 2002 i686 unknown
xm@moxie:~$ cat /etc/deb
debconf.conf debian_version
xm@moxie:~$ cat /etc/debian_version
3.0
xm@moxie:~$ scanimage -V
scanimage (sane-backends) 1.0.7; backend version 1.0.7
xm@moxie:~$ cat /etc/modutils/plustek
alias char-major-40 pt_drv
pre-install pt_drv modprobe -k parport
options pt_drv lampoff=180 warmup=15 port=0x378 lOffonEnd=0 mov=0
slowIO=0 forceMode=0
Oct 17 21:07:09 moxie kernel:
*********************************************
Oct 17 21:07:09 moxie kernel: pt_drv: init_module()
Oct 17 21:07:09 moxie kernel: pt_drv : driver version 0.41-6
Oct 17 21:07:09 moxie kernel: ProcFsInitialize()
Oct 17 21:07:09 moxie kernel: ptdrvInit(0)
Oct 17 21:07:09 moxie kernel: Init settings done
Oct 17 21:07:09 moxie kernel: ScanData = 0xc25e8000
Oct 17 21:07:09 moxie kernel: Using fast I/O
Oct 17 21:07:09 moxie kernel: Requested port at 0x378
Oct 17 21:07:09 moxie kernel: Requested port (0x378) found
Oct 17 21:07:09 moxie kernel: Port mode reported: (0x0047)
Oct 17 21:07:09 moxie kernel: Port for device 0 registered
Oct 17 21:07:09 moxie kernel: ptdrvOpen(port=0x378)
Oct 17 21:07:09 moxie kernel: Try to claim the parport
Oct 17 21:07:09 moxie kernel: parport-modi: SPP PS/2 EPP EPP(ECP)
PS/2(ECP)
Oct 17 21:07:09 moxie kernel: Using EPP-mode
Oct 17 21:07:09 moxie kernel: Starting Scanner-Autodetection
Oct 17 21:07:09 moxie kernel: ************ DETECTP48xx ************
Oct 17 21:07:09 moxie kernel: ModelSet4800()
Oct 17 21:07:09 moxie kernel: modelInitPageSettings()
Oct 17 21:07:09 moxie kernel: A4 set
Oct 17 21:07:09 moxie kernel: ModelSet4800() done.
Oct 17 21:07:09 moxie kernel: P48xxInitAsic()
Oct 17 21:07:09 moxie kernel: DacInitialize()
Oct 17 21:07:09 moxie kernel: ImageInitialize()
Oct 17 21:07:09 moxie kernel: IOFuncInitialize()
Oct 17 21:07:09 moxie kernel: IOInitialize()
Oct 17 21:07:09 moxie kernel: MotorInitialize()
Oct 17 21:07:09 moxie kernel: Dataport = 0x0378
Oct 17 21:07:09 moxie kernel: Ctrlport = 0x037a
Oct 17 21:07:09 moxie kernel: Test 0x55
Oct 17 21:07:09 moxie kernel: Test 0xAA
Oct 17 21:07:09 moxie kernel: Compare data=0x79 and status=0x9,
port=0x378
Oct 17 21:07:09 moxie kernel: p48xxReadWriteTest()
Oct 17 21:07:09 moxie kernel: Found a 96003 ASIC at Reg 0x13
Oct 17 21:07:09 moxie kernel: ModelSet4830()
Oct 17 21:07:09 moxie kernel: modelInitPageSettings()
Oct 17 21:07:09 moxie kernel: A4 set
Oct 17 21:07:09 moxie kernel: ModelSet4830() done.
Oct 17 21:07:09 moxie kernel: p48xxDoTest()
Oct 17 21:07:09 moxie kernel: Bank not present, error at pos 503 (512)
Oct 17 21:07:09 moxie kernel: found 40960 bytes of memory
Oct 17 21:07:09 moxie kernel: tmpByte[0x18] = 0x02
Oct 17 21:07:09 moxie kernel: tmpByte = 0x02, cntr = 84, AsicId = 0x10
Oct 17 21:07:09 moxie kernel: Scanner is not a 9630 or above
Oct 17 21:07:09 moxie kernel: Looks like a 600!
Oct 17 21:07:09 moxie kernel: ModelSet600()
Oct 17 21:07:09 moxie kernel: ModelSet4830()
Oct 17 21:07:09 moxie kernel: modelInitPageSettings()
Oct 17 21:07:09 moxie kernel: A4 set
Oct 17 21:07:09 moxie kernel: ModelSet4830() done.
Oct 17 21:07:09 moxie kernel: ModelSet600() done.
Oct 17 21:07:09 moxie kernel: DacInitialize()
Oct 17 21:07:09 moxie kernel: ImageInitialize()
Oct 17 21:07:09 moxie kernel: IOFuncInitialize()
Oct 17 21:07:09 moxie kernel: IOInitialize()
Oct 17 21:07:09 moxie kernel: MotorInitialize()
Oct 17 21:07:09 moxie kernel: Putting Scanner (ASIC 96001/3) into
Idle-Mode
Oct 17 21:07:09 moxie kernel: detectScannerConnection() returns 0.
Oct 17 21:07:09 moxie kernel: p48xxSetupScannerVariables()
Oct 17 21:07:09 moxie kernel: No ASIC 97003 found.
Oct 17 21:07:09 moxie kernel: Status-Register = 0xA7
Oct 17 21:07:09 moxie kernel: Scanner has Full/Half Stepping drive
Oct 17 21:07:09 moxie kernel: CCD is SONY Type
Oct 17 21:07:10 moxie kernel: *** setupBuffers ***
Oct 17 21:07:10 moxie kernel: Driverbuf(83240 bytes) needed !
Oct 17 21:07:10 moxie kernel: pColorRunTab = 0xe0b54200 - 0xe0b56528
Oct 17 21:07:10 moxie kernel: *** DETECTION DONE, result: 0 ***
Oct 17 21:07:10 moxie kernel: Switching lamp 0 on.
Oct 17 21:07:10 moxie kernel: ptdrvClose()
Oct 17 21:07:10 moxie kernel: *** cleanup buffers ***
Oct 17 21:07:10 moxie kernel: MiscRestorePort()
Oct 17 21:07:10 moxie kernel: - no need to restore portmode !
Oct 17 21:07:10 moxie kernel: Releasing parport
Oct 17 21:07:10 moxie kernel: MiscGetModelName - id = 7
Oct 17 21:07:10 moxie kernel: pt_drv0: 600P/6000P found on port 0x0378
Oct 17 21:07:10 moxie kernel: pt_drv0: Lamp-Timer set to 180 seconds.
Oct 17 21:07:10 moxie kernel: pt_drv0: WarmUp period set to 30 seconds.
Oct 17 21:07:10 moxie kernel: pt_drv0: Lamp untouched on driver unload.
Oct 17 21:07:10 moxie kernel: Lamp-Timer started!
Oct 17 21:07:10 moxie kernel: pt_drv : init done, 1 device(s) found
Oct 17 21:07:10 moxie kernel:
---------------------------------------------
Any hope here? I'd be happy with a quick source code hack to clean this
up.
Sample garbled output:
http://while1.org/~xm/misc/out.pnm.bz2
--
####@####.#### (http://while1.net/)
