plustek: OpticPro4830P with SuSE 7.2 : insmod error
Subject:
Re: OpticPro4830P with SuSE 7.2 : insmod error
From:
"Jaeger, Gerhard" ####@####.####
Date:
14 Nov 2002 19:21:52 -0000
Message-Id: <18CPTY-0vwdySC@fmrl01.sul.t-online.com>
Hi,
I think this is again a BIOS parport setting problem, make sure
to have at least SPP or EPP enabled in the BIOS, NO ECP
Gerhard
On Tuesday, 12. November 2002 15:43, Frederick Klauschen wrote:
> Hi,
> I tried install the plustek-driver for my
> OpticPro4830P scanner, but I get an "insmod" error:
> This is what happens:
> reunion backend/plustek_driver# make load
> /sbin/modprobe pt_drv || exit 1
> /lib/modules/2.4.4-4GB/misc/pt_drv.o: init_module:
> Success
> Hint: insmod errors can be caused by incorrect module
> parameters, including invalid IO or IRQ parameters
> /lib/modules/2.4.4-4GB/misc/pt_drv.o: insmod
> /lib/modules/2.4.4-4GB/misc/pt_drv.o failed
> /lib/modules/misc/pt_drv.o: insmod pt_drv failed
> make: *** [load] Error 1
>
> I tried the following versions of the driver:
> plustek-module-0_41_5.tar.gz
> plustek-module-0_42_9.tar.gz
> plustek-sane-0_36_38.tar.gz
> plustek-sane-0_44_10.tar.gz
> all produced the same error.
> I made the changes in modules.conf as indicated
> in the instructions.
> My parallel port's address is:
> 0378-037a parport0
> 037b-037f parport0
> so port=0x378 should be o.k., I guess.
> Could anyone help me?
> Thanks,
> Fred
