plustek: Plustec OptocPro UT12 USB
Subject:
Plustec OptocPro UT12 USB
From:
Edmund Stranzenbach ####@####.####
Date:
15 Nov 2002 11:30:30 -0000
Message-Id: <200211151228.37878.stranzenbach@web.de>
Hallo
My scanner does not work with sane currently.
I checked http://www.gjaeger.de/scanner/usb/Plustek-USB.txt with the following
results:
sane-find-scanner does not recognise my scanner.
cat /proc/bus/usb/devices produced the following output:
...
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB OHCI Root Hub
S: SerialNumber=d4962000
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=07b3 ProdID=0001 Rev= 0.00
S: Product=USB Scanner
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 48mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=10(unk. ) Sub=01 Prot=00 Driver=usbscanner
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 6
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.04
S: Manufacturer=Linux 2.4.19-4GB ehci-hcd
S: Product=PCI device 1039:7002
S: SerialNumber=00:03.3
the VendorID=07b3 looks ok, but the ProdID=0001 is not found in elsewhere in
the sane docs.
Can i chathe the kernel's USB device database to include this ProdID?
What else can i do ?
Thank`s for help.
Best regards
Eddy
--
Ing. Büro Stranzenbach, Görzkerstr. 23, 14827 Wiesenburg
Tel. 033849/50764, Fax 033849/50765, Handy 0178/5677 018