plustek: Plustec OptocPro UT12 USB
Subject:
Re: Plustec OptocPro UT12 USB
From:
Gerhard Jaeger ####@####.####
Date:
15 Nov 2002 11:35:14 -0000
Message-Id: <200211151231.04797.gerhard@gjaeger.de>
Hi,
nothing can be done so far, as this scanner is not and probably won't be
support by the backend so far. It contains the old parallel port scanner
ASIC P98003 and a USB-to-Parallel bridge which is not supported.
Sorry
Gerhard
On Freitag, 15. November 2002 12:28, Edmund Stranzenbach wrote:
> Hallo
> My scanner does not work with sane currently.
> I checked http://www.gjaeger.de/scanner/usb/Plustek-USB.txt with the
> following results:
> sane-find-scanner does not recognise my scanner.
> cat /proc/bus/usb/devices produced the following output:
> ...
> C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
> I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
> E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
> T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
> B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
> D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
> P: Vendor=0000 ProdID=0000 Rev= 0.00
> S: Product=USB OHCI Root Hub
> S: SerialNumber=d4962000
> C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
> I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
> E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
> T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
> D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
> P: Vendor=07b3 ProdID=0001 Rev= 0.00
> S: Product=USB Scanner
> C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 48mA
> I: If#= 0 Alt= 0 #EPs= 2 Cls=10(unk. ) Sub=01 Prot=00 Driver=usbscanner
> E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 6
> B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
> D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS= 8 #Cfgs= 1
> P: Vendor=0000 ProdID=0000 Rev= 2.04
> S: Manufacturer=Linux 2.4.19-4GB ehci-hcd
> S: Product=PCI device 1039:7002
> S: SerialNumber=00:03.3
>
> the VendorID=07b3 looks ok, but the ProdID=0001 is not found in elsewhere
> in the sane docs.
> Can i chathe the kernel's USB device database to include this ProdID?
> What else can i do ?
>
> Thank`s for help.
>
> Best regards
> Eddy
