plustek: Epson 1260 scanner with SANE
Subject:
Re: Epson 1260 scanner with SANE
From:
"Karl F. Larsen" ####@####.####
Date:
21 Nov 2002 20:42:43 -0000
Message-Id: <Pine.LNX.4.44.0211211333320.2033-100000@Bucket.dog>
Hi Howard, looks like SANE can find your scanner so the problem must be
in the file plustek.conf and here is mine that works:
# Plustek-SANE Backend configuration file
# For use with Plustek parallel-port scanners and
# LM9831/2/3 based USB scanners
[usb] 0x04b8 0x010f
device /dev/usb/scanner0
Notice it's very short. Once you get yours running you can add other
stuff.
On Thu, 21 Nov 2002, Howard Lowndes wrote:
> I am trying to get a Epson 1260 scanner (non-TPA) working with SANE on a
> RedHat 8.0 Personal Desktop installation.
>
> The SANE list shows it as using the plustek backend.
>
> ...cat /proc/bus/usb/devices shows the kernel as recognising it:
> T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
> D: Ver= 1.10 Cls=ff(vend.) Sub=00 Prot=ff MxPS= 8 #Cfgs= 1
> P: Vendor=04b8 ProdID=011d Rev= 1.00
> S: Manufacturer=EPSON
> S: Product=EPSON Scanner
> C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 2mA
> I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=ff Driver=usbscanner
> E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=16ms
> E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> E: Ad=03(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
>
> ...sane-find-scanner finds it:
> sane-find-scanner: found USB scanner (vendor = 0x04b8, product = 0x011d)
> at device /dev/usb/scanner0
>
> ...the /etc/sane.d/plustek.conf files looks like:
> [usb] 0x04b8 0x011d
> option lampOff 0
> option warmup 30
> option lOffOnEnd 0
> option posOffX 0
> option posOffY 0
> option tpaOffX 0
> option tpaOffY 0
> option negOffX 0
> option negOffY 0
> option redGamma 1.0
> option greenGamma 1.0
> option blueGamma 1.0
> option grayGamma 1.0
> device /dev/usb/scanner0
>
> ...the scanner modules is loaded according to lsmod:
> Module Size Used by Not tainted
> sg 36556 0 (autoclean)
> scanner 10420 0
> sr_mod 18136 0 (autoclean)
> i810_audio 25224 0 (autoclean)
> ac97_codec 13384 0 (autoclean) [i810_audio]
> soundcore 6532 2 (autoclean) [i810_audio]
> autofs 13348 0 (autoclean) (unused)
> 8139too 17704 1
> mii 2156 0 [8139too]
> iptable_filter 2412 0 (autoclean) (unused)
> ip_tables 14936 1 [iptable_filter]
> ide-scsi 10512 0
> scsi_mod 107176 3 [sg sr_mod ide-scsi]
> ide-cd 33608 0
> cdrom 33696 0 [sr_mod ide-cd]
> mousedev 5524 1
> keybdev 2976 0 (unused)
> hid 22244 0 (unused)
> input 5888 0 [mousedev keybdev hid]
> usb-uhci 26188 0 (unused)
> ehci-hcd 17480 0 (unused)
> usbcore 77024 1 [scanner hid usb-uhci ehci-hcd]
> ext3 70368 2
> jbd 52212 2 [ext3]
>
> ...the /etc/modules.conf looks like:
> alias parport_lowlevel parport_pc
> alias eth0 8139too
> alias usb-controller ehci-hcd
> alias sound-slot-0 i810_audio
> post-install sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -L >/dev/null 2>&1 || :
> pre-remove sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -S >/dev/null 2>&1 || :
> alias usb-controller1 usb-uhci
> options scanner vendor=0x04B8 product=0x011D
>
> ...but scanimage is adamant:
> scanimage: no SANE devices found
>
> ...and at that point I run out of ideas.
>
> Guidance, divine or otherwise, is urgently and graciously, sought.
>
>
--
- Karl Larsen k5di Las Cruces,NM Az ScQRPions -
