Subject:
Re: Epson 1260 scanner with SANE
From:
Howard Lowndes ####@####.####
Date:
21 Nov 2002 21:09:17 -0000
Message-Id: <Pine.LNX.4.33.0211220747370.3170-100000@int.lannet.com.au>
Tks for the prompt response.
.../etc/sane.d/dll.conf _does_ have the plustek entry
...the libsane library is:
lrwxrwxrwx 1 root root 16 Nov 20 18:18 /usr/lib/libsane.so.1 -> libsane.so.1.0.8
-rwxr-xr-x 1 root root 26457 Jun 24 10:20 /usr/lib/libsane.so.1.0.8
...debug output from scanimage follows, notice the line that says
"[plustek] Device >0x04B8-0x011D<, is not supported!":
[sanei_debug] Setting debug level of plustek to 12.
[plustek] sane_init: sane-backends 1.0.8
[plustek] sane_init, >[usb] 0x04b8 0x011d<
[plustek] next device is a USB device (0x04B8-0x011D)
[plustek] next device is an USB device
[plustek] sane_init, >option lampOff 0<
[plustek] Decoding option >lampOff<
[plustek] sane_init, >option warmup 30<
[plustek] Decoding option >warmup<
[plustek] sane_init, >option lOffOnEnd 0<
[plustek] Decoding option >lOffOnEnd<
[plustek] sane_init, >option posOffX 0<
[plustek] Decoding option >posOffX<
[plustek] sane_init, >option posOffY 0<
[plustek] Decoding option >posOffY<
[plustek] sane_init, >option tpaOffX 0<
[plustek] Decoding option >tpaOffX<
[plustek] sane_init, >option tpaOffY 0<
[plustek] Decoding option >tpaOffY<
[plustek] sane_init, >option negOffX 0<
[plustek] Decoding option >negOffX<
[plustek] sane_init, >option negOffY 0<
[plustek] Decoding option >negOffY<
[plustek] sane_init, >option redGamma 1.0<
[plustek] Decoding option >redGamma<
[plustek] sane_init, >option greenGamma 1.0<
[plustek] Decoding option >greenGamma<
[plustek] sane_init, >option blueGamma 1.0<
[plustek] Decoding option >blueGamma<
[plustek] sane_init, >option grayGamma 1.0<
[plustek] Decoding option >grayGamma<
[plustek] sane_init, >device /dev/usb/scanner0<
[plustek] Decoding device name >/dev/usb/scanner0<
[plustek] attach (/dev/usb/scanner0, 0xbfffd590, (nil))
[plustek] Device configuration:
[plustek] device name : >/dev/usb/scanner0<
[plustek] porttype : 1
[plustek] USB-ID : >0x04B8-0x011D<
[plustek] warmup : 30s
[plustek] lampOff : 0
[plustek] lampOffOnEnd : 0
[plustek] pos_x : 0
[plustek] pos_y : 0
[plustek] neg_x : 0
[plustek] neg_y : 0
[plustek] tpa_x : 0
[plustek] tpa_y : 0
[plustek] red Gamma : 1.00
[plustek] green Gamma : 1.00
[plustek] blue Gamma : 1.00
[plustek] gray Gamma : 1.00
[plustek] ---------------------
[plustek] drvopen()
[plustek] usbDev_open(/dev/usb/scanner0,0x04B8-0x011D)
[plustek] Vendor ID=0x04B8, Product ID=0x011D
[plustek] Device >0x04B8-0x011D<, is not supported!
[plustek] open failed: -1
[plustek] sane_get_devices (0xbffff668, 0)
[plustek] sane_exit
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
On Thu, 21 Nov 2002, Gerhard Jaeger wrote:
> Hi,
>
> this all looks good, the only thing you should also check is the dll.conf
> (in /etc/sane.d) it should contain the plustek entry...
>
> If this does not help, enable the debug output of the Plustek backend
> and send it to me:
> export SANE_DEBUG_PLUSTEK=12
> scanimage -L
>
> Hope this helps
> Gerhard
>
> On Donnerstag, 21. November 2002 02:06, Howard Lowndes wrote:
> > I am trying to get a Epson 1260 scanner (non-TPA) working with SANE on a
> > RedHat 8.0 Personal Desktop installation.
> >
> > The SANE list shows it as using the plustek backend.
> >
> > ...cat /proc/bus/usb/devices shows the kernel as recognising it:
> > T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
> > D: Ver= 1.10 Cls=ff(vend.) Sub=00 Prot=ff MxPS= 8 #Cfgs= 1
> > P: Vendor=04b8 ProdID=011d Rev= 1.00
> > S: Manufacturer=EPSON
> > S: Product=EPSON Scanner
> > C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 2mA
> > I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=ff Driver=usbscanner
> > E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=16ms
> > E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> > E: Ad=03(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> >
> > ...sane-find-scanner finds it:
> > sane-find-scanner: found USB scanner (vendor = 0x04b8, product = 0x011d)
> > at device /dev/usb/scanner0
> >
> > ...the /etc/sane.d/plustek.conf files looks like:
> > [usb] 0x04b8 0x011d
> > option lampOff 0
> > option warmup 30
> > option lOffOnEnd 0
> > option posOffX 0
> > option posOffY 0
> > option tpaOffX 0
> > option tpaOffY 0
> > option negOffX 0
> > option negOffY 0
> > option redGamma 1.0
> > option greenGamma 1.0
> > option blueGamma 1.0
> > option grayGamma 1.0
> > device /dev/usb/scanner0
> >
> > ...the scanner modules is loaded according to lsmod:
> > Module Size Used by Not tainted
> > sg 36556 0 (autoclean)
> > scanner 10420 0
> > sr_mod 18136 0 (autoclean)
> > i810_audio 25224 0 (autoclean)
> > ac97_codec 13384 0 (autoclean) [i810_audio]
> > soundcore 6532 2 (autoclean) [i810_audio]
> > autofs 13348 0 (autoclean) (unused)
> > 8139too 17704 1
> > mii 2156 0 [8139too]
> > iptable_filter 2412 0 (autoclean) (unused)
> > ip_tables 14936 1 [iptable_filter]
> > ide-scsi 10512 0
> > scsi_mod 107176 3 [sg sr_mod ide-scsi]
> > ide-cd 33608 0
> > cdrom 33696 0 [sr_mod ide-cd]
> > mousedev 5524 1
> > keybdev 2976 0 (unused)
> > hid 22244 0 (unused)
> > input 5888 0 [mousedev keybdev hid]
> > usb-uhci 26188 0 (unused)
> > ehci-hcd 17480 0 (unused)
> > usbcore 77024 1 [scanner hid usb-uhci ehci-hcd]
> > ext3 70368 2
> > jbd 52212 2 [ext3]
> >
> > ...the /etc/modules.conf looks like:
> > alias parport_lowlevel parport_pc
> > alias eth0 8139too
> > alias usb-controller ehci-hcd
> > alias sound-slot-0 i810_audio
> > post-install sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -L >/dev/null
> > 2>&1 || : pre-remove sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -S
> > >/dev/null 2>&1 || : alias usb-controller1 usb-uhci
> > options scanner vendor=0x04B8 product=0x011D
> >
> > ...but scanimage is adamant:
> > scanimage: no SANE devices found
> >
> > ...and at that point I run out of ideas.
> >
> > Guidance, divine or otherwise, is urgently and graciously, sought.
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: ####@####.####
> For additional commands, e-mail: ####@####.####
>
--
Howard.
LANNet Computing Associates - Your Linux people
Contact detail at http://www.lannetlinux.com
"Flatter government, not fatter government." - me
Get rid of the Australian states.
------------------------------------------
If electricity comes from electrons, does morality come from morons?