plustek: OpticPro UT12
Subject:
OpticPro UT12
From:
"Darryl Cousins" ####@####.####
Date:
14 Jan 2003 21:28:57 -0000
Message-Id: <20030114212658.M35272@ipage.pl>
Hi,
Nine hours and still it isn't working (where did that time go?)
Please advise.
Kernel - 2.4.20
Distro - LFS
Sane - 1.0.9
Driver - plustek-sane-0.45-1
Install went fine.
# sane-find-scanner
<snip>
found USB scanner (vendor=0x07b3, product=0x0001) at /dev/usbscanner
# Your USB scanner was detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
</snip>
# scanimage -L
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
I got adventurous and added
{"0x07B3-0x0001-0", &Cap0x07B3_0x0017_0, &Hw0x07B3_0x0017_0, "My OpticPro UT12" },
to backends/plustek-devs.c
reinstalled sane backend
# scanimage -L
[plustek] drvopen()
[plustek] usbDev_open(/dev/usbscanner,0x07B3-0x0001)
[plustek] Vendor ID=0x07B3, Product ID=0x0001
[plustek] usbio_DetectLM983x
[plustek] UIO error
[plustek] This is not a LM9831 or LM9832 chip based scanner.
[plustek] open failed: -1
No scanners were identified. etc
Well maybe expected. Can anyone help???
'Plustek OpticPro UT12' is boldly written on the scanner. And the bed light
is on at all times when plugged in.
-----------------------------------------------------------------
# cat /proc/bus/usb/devices
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI-alt Root Hub
S: SerialNumber=1020
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=07b3 ProdID=0001 Rev= 0.00
S: Product=USB Scanner
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 48mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=10(unk. ) Sub=01 Prot=00 Driver=usbscanner
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
