plustek: Scanner error
Subject:
Scanner error
From:
Vijay Venkatraman ####@####.####
Date:
15 Jan 2003 21:33:57 -0000
Message-Id: <3E25D23F.8030703@lindows.com>
Hi,
I am getting this error while trying to setup my USB Canon N670U
scanner using the SANE interface. The log gives the following message:
scanner.c: write_scanner(0): funky result: -32. Consult
Documentation/usb/scanner.txt
I couldnt find any scanner.txt on my machine. I would be glad if you
could help me regarding this. I have attached the plustek.conf file
which I used. I loaded scanner.o with vendorid and productid of the device.
Thanks
Vijay
# Plustek-SANE Backend configuration file
# For use with Plustek parallel-port scanners and
# LM9831/2 based USB scanners
#
# For parport devices use the parport section
#
[parport]
device /dev/pt_drv
#
# leave the default values as specified in /etc/modules.conf
#
warmup -1
lOffOnEnd -1
lampOff -1
#
# The USB section
# each device needs at least two lines:
# - [usb] vendor-ID and product-ID
# - device devicename
# i.e. for Plustek (0x07B3) UT12/16/24 (0x0017)
# [usb] 0x07B3 0x0017
# device /dev/usbscanner
#
# additionally you can specify some options
# warmup, lOffOnEnd, lampOff
#
# For autodetection
# [usb]
# device /dev/usbscanner
#
[usb] 0x04a9 0x220d
#
# options for the previous USB entry
#
# switch lamp off after xxx secs, 0 disables the feature
option lampOff 0
# warmup period in seconds, 0 means no warmup
option warmup 180
# 0 means leave lamp-status untouched, not 0 means switch off
# on sane_close
option lOffOnEnd 0
#
# and of course the device-name
#
device /dev/usb/scanner0
#
# to define a new device, start with a new section:
# [usb] or [parport]
#