plustek: Kernel 2.4-test7
Subject:
Re: Kernel 2.4-test7
From:
####@####.#### (G. Jaeger)
Date:
13 Sep 2000 17:47:04 -0000
Message-Id: <13ZGe5-0mdBGiC@fwd03.sul.t-online.com>
On Wed, 13 Sep 2000 16:00:44 +0200, pcxz wrote:
>
>Excuse my English!!
>
>I use Plustek OP600P with Kernel 2.2.16-3 and is all OK :-)
>.
>.
>I testing linux kernel 2.4-test7, ricompiled device, have this problem:
>during boot --> "...modules ...unresolving simbol..pt_drv .."
>
>If launch (to window terminal):
>-----------------------
>insmod /lib/modules/2.4.0-test7/kernel/drivers/parport/parport.o
>(all ok)
>-----------------------
>insmod /lib/modules/2.4.0-test7/kernel/drivers/parport/parport_pc.o
>io=0x278 irq=5,auto
>(all ok)
>-----------------------
>insmod /lib/modules/2.4.0-test7/misc/pt_drv.o lampoff=180 warmup=15
>port=0x278 lOffonEnd=0 mov=0
>
>/lib/modules/2.4.0-test7/misc/pt_drv.o: init_module: Successfull
>
>(and lamp is on!!!!)
>-----------------------
>
>At this point if I scan with xsane or other have "..devices not
>available.."
>or if test scanimage -L :
>[plustek] open: can't open /dev/pt_drv as a device
>[plustek] attach: open failed: Error during device I/O
>
>I relaunch:
>insmod pt_drv
>Using /lib/modules/2.4.0-test7/misc/pt_drv.o
>Segmentation fault
>
>If is possible please help me, thanks!
>
>--
Hi,
can you enable the debug messages of the driver!
(in Makefile, simply uncomment the line #DEBUG=y)
recompile and reload, then send me what you get
from dmesg.
I have done only a few tests with that kernel.
Gerhard
----------------------------------------
####@####.####
----------------------------------------
