plustek: pt_drv doesn't load with kernel 2.4
Subject:
Re: pt_drv doesn't load with kernel 2.4
From:
Johannes Kaiser ####@####.####
Date:
3 Feb 2001 13:36:02 -0000
Message-Id: <Pine.LNX.4.21.0102031440001.1896-100000@elvis.sumpf>
Hi Gerhard,
first of all I have to thank you for your prompt response.
> You might try and load the parport stuff manually. Your scanner
> shouldn't be attached during this action. After that, plug in the
> scanner and try to load the driver.
Okay, that's my terminal:
[root@elvis johnny]# insmod parport
Using /lib/modules/2.4.0/kernel/drivers/parport/parport.o
[root@elvis johnny]# insmod parport_pc io=0x278 irq=5 dma=3
Using /lib/modules/2.4.0/kernel/drivers/parport/parport_pc.o
[root@elvis johnny]# dmesg
[...]
0x278: FIFO is 16 bytes
0x278: writeIntrThreshold is 9
0x278: readIntrThreshold is 9
0x278: PWord is 8 bits
0x278: Interrupts are ISA-Pulses
0x278: ECP port cfgA=0x10 cfgB=0x78
0x278: ECP settings irq=5 dma=<none or set by other means>
parport0: PC-style at 0x278 (0x678), irq 5, dma 3
[PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
Now I plug in the scanner and turn its power on.
[root@elvis johnny]# insmod pt_drv lampoff=180 warmup=15 port=0x278
lOffonEnd=0 mov=1
Using /lib/modules/2.4.0/misc/pt_drv.o
/lib/modules/2.4.0/misc/pt_drv.o: init_module: Success
Hint: insmod errors can be caused by incorrect module parameters,
including invalid IO or IRQ parameters
[root@elvis johnny]# dmesg
[...]
*********************************************
pt_drv: init_module()
pt_drv : driver version 0.37-24
ptdrvInit(0)
Init settings done
ScanData = 0xc21c8000
Requested port at 0x278
Requested port (0x278) found
Port mode reported: (0x007f)
Port for device 0 registered
ptdrvOpen(port=0x278)
Try to claim the parport
parport-modi: SPP PS/2 EPP ECP EPP(ECP) PS/2(ECP)
Using EPP-mode
Trying faster mode...
Starting Scanner-Autodetection
************ DETECTP48xx ************
ModelSet4800()
modelInitPageSettings()
A4 set
ModelSet4800() done.
P48xxInitAsic()
DacInitialize()
ImageInitialize()
IOFuncInitialize()
IOInitialize()
MotorInitialize()
Dataport = 0x0278
Ctrlport = 0x027a
Test 0x55
Test 0xAA
Compare data=0x7f and status=0xf, port=0x278
p48xxReadWriteTest()
Found a 96003 ASIC at Reg 0x13
ModelSet4830()
modelInitPageSettings()
A4 set
ModelSet4830() done.
p48xxDoTest()
IODELAY = 0
Bank 0 overwritten
found 0 bytes of memory
No memory ! No scanner...
p48xxReadWriteTest()
Found a 96003 ASIC at Reg 0x13
ModelSet4830()
modelInitPageSettings()
A4 set
ModelSet4830() done.
p48xxDoTest()
IODELAY = 1
Bank 0 overwritten
found 0 bytes of memory
No memory ! No scanner...
p48xxReadWriteTest()
Found a 96003 ASIC at Reg 0x13
ModelSet4830()
modelInitPageSettings()
A4 set
ModelSet4830() done.
p48xxDoTest()
IODELAY = 2
Bank 0 overwritten
found 0 bytes of memory
No memory ! No scanner...
p48xxReadWriteTest()
Found a 96003 ASIC at Reg 0x13
ModelSet4830()
modelInitPageSettings()
A4 set
ModelSet4830() done.
p48xxDoTest()
IODELAY = 3
Bank 0 overwritten
found 0 bytes of memory
No memory ! No scanner...
p48xxReadWriteTest()
Found a 96003 ASIC at Reg 0x13
ModelSet4830()
modelInitPageSettings()
A4 set
ModelSet4830() done.
p48xxDoTest()
IODELAY = 4
Bank 0 overwritten
found 0 bytes of memory
No memory ! No scanner...
detectScannerConnection() returns -9020.
************ DETECTP9636 ************
ModelSet9636()
ModelSet9360()
Model Override --> 9630PL
modelInitPageSettings()
Legal set
ModelSet9630() done.
modelInitPageSettings()
A4 set
ModelSet9636() done.
P9636InitAsic()
DacInitialize()
ImageInitialize()
IOFuncInitialize()
IOInitialize()
MotorInitialize()
AsicID = 0xf0
ptdrvClose()
MiscRestorePort()
- no need to restore portmode !
Releasing parport
ptdrvShutdown()
cleanup device 0
Lamp-Timer stopped !
Try to claim the parport
Releasing parport
Port unregistered
pt_drv: proc del 'info' root='pt_drv'
pt_drv: proc del 'pt_drv' root='/proc'
pt_drv : no device(s) detected, (-9020)
---------------------------------------------
The same thing happens if I leave the model override switch untouched.
Greetings!
Johannes
