plustek: Kernel 2.4 and ASIC96001/3 models
Subject:
Re: Kernel 2.4 and ASIC96001/3 models
From:
"G. Jaeger" ####@####.####
Date:
12 Feb 2001 18:03:18 -0000
Message-Id: <14SNMr-0bTbGaC@fmrl04.sul.t-online.com>
Hi Mark,
well I don't think, that the IEEE1284 stuff is responsible
for your problem as you had the probs with 2.2.x too!
Can you send me a small picture, that illustrates your problem?
(Please not too large!!!)
Gerhard
On Sun, 11 Feb 2001 21:54:21 -0500, Mark Bratcher wrote:
>"G. Jaeger" wrote:
>>
>> Hi list,
>>
>> it seems, that the IEEE1284 autodetection of parport devices
>> will cause some trouble on ASIC96001/3 based models
>> like OP4830, OP9630 and so on. This module is part of
>> the new kernel 2.4 and should be disabled in the kernel
>> configuration.
>>
>> The autodetection seems to cause a hangup on the ASICs
>> so the driver can't talk to these scanners anymore.
>>
>> I'm not sure if this also causes problems with newer devices
>> like the 9636T and the PT12.
>>
>> Gerhard
>
>Gerhard,
>
>I have the 9636T and kernel 2.4 with autodetect turned on.
>It does not cause any hangs in the few tests I've run.
>However, I don't know if it is in any way responsible for
>the other scanning problems I'm having which I previously
>reported.
>
>(BTW, I'm using sane 1.0.4 and plustek_sane 0_37_24.)
>
>--
>Mark Bratcher
>---------------------------------------------------------
>Escape from Microsoft's proprietary tentacles: use Linux!
>
>---------------------------------------------------------------------
>To unsubscribe, e-mail: ####@####.####
>For additional commands, e-mail: ####@####.####
>
----------------------------------------
####@####.####
----------------------------------------
