plustek: 3636T not working after switching from kernel2.4.2 to 2.4.5-pre1
Subject:
Re: 3636T not working after switching from kernel2.4.2 to 2.4.5-pre1
From:
"Jaeger, Gerhard" ####@####.####
Date:
13 May 2001 16:56:23 -0000
Message-Id: <01051318575300.00714@ruebennase>
No idea!
It seems, that they changed again the IEEE1248 stuff. FYI if the values
in the line:
->Compare data=0xfe and status=0xfe, port=0x378<-
contain the same value, the autodetection stops, because the
parport is not correctly initialized (or the ASIC within the scanner
hangs...)
The only thing here you can do is playing around with parport-modes
or you still wait until I have checked the 2.4.5pre1 on my box
(I'll do this tomorrow - promised...)
I think I should skip this parport stuff conpletely....
Gerhard
On Saturday, 12. May 2001 18:26, Dr.Georg Möser wrote:
> pt_drv works almost perfect on kernel-2.4.2, some hangs, though, restart
> xsane does the work
> 2 days ago I compiled a kernel-2.4.5-pre1 (I was interested in using CD-RW
> (rw). Since then, pt_drv does no longer register the 9636T, though it seems
> to be recognized. Any idea what to do?
>
> Output in /var/log/messages:
> May 11 21:38:54 gogi kernel: pt_drv: init_module()
> May 11 21:38:54 gogi kernel: pt_drv : driver version = 0.36-38
> May 11 21:38:54 gogi kernel: ptdrvInit(0)
> May 11 21:38:54 gogi kernel: Init settings done
> May 11 21:38:54 gogi kernel: ScanData = 0xc3d58000
> May 11 21:38:54 gogi kernel: Requested port at 0x378
> May 11 21:38:54 gogi kernel: Requested port (0x378) found
> May 11 21:38:54 gogi kernel: Port mode reported: (0x0047)
> May 11 21:38:54 gogi kernel: Port for device 0 registered
> May 11 21:38:54 gogi kernel: ptdrvOpen(port=0x378)
> May 11 21:38:54 gogi kernel: Try to claim the parport
> May 11 21:38:54 gogi kernel: Using EPP-mode
> May 11 21:38:54 gogi kernel: Starting Scanner-Autodetection
> May 11 21:38:54 gogi kernel: ************ DETECTP48xx ************
> May 11 21:38:54 gogi kernel: ModelSet4800()
> May 11 21:38:54 gogi kernel: modelInitPageSettings()
> May 11 21:38:54 gogi kernel: A4 set
> May 11 21:38:54 gogi kernel: ModelSet4800() done.
> May 11 21:38:54 gogi kernel: P48xxInitAsic()
> May 11 21:38:54 gogi kernel: DacInitialize()
> May 11 21:38:54 gogi kernel: ImageInitialize()
> May 11 21:38:54 gogi kernel: IOInitialize()
> May 11 21:38:54 gogi kernel: MotorInitialize()
> May 11 21:38:54 gogi kernel: Dataport = 0x0378
> May 11 21:38:54 gogi kernel: Ctrlport = 0x037a
> May 11 21:38:54 gogi kernel: Test 0x55
> May 11 21:38:54 gogi kernel: Test 0xAA
> May 11 21:38:54 gogi kernel: Compare data=0xfe and status=0xfe, port=0x378
> May 11 21:38:54 gogi kernel: detectScannerConnection() returns -9021.
> May 11 21:38:54 gogi kernel: ************ DETECTP9636 ************
> May 11 21:38:54 gogi kernel: ModelSet9636()
> May 11 21:38:54 gogi kernel: ModelSet9360()
> May 11 21:38:54 gogi kernel: modelInitPageSettings()
> May 11 21:38:54 gogi kernel: A4 set
> May 11 21:38:54 gogi kernel: ModelSet9630() done.
> May 11 21:38:54 gogi kernel: modelInitPageSettings()
> May 11 21:38:54 gogi kernel: A4 set
> May 11 21:38:54 gogi kernel: ModelSet9636() done.
> May 11 21:38:54 gogi kernel: P9636InitAsic()
> May 11 21:38:54 gogi kernel: DacInitialize()
> May 11 21:38:54 gogi kernel: ImageInitialize()
> May 11 21:38:54 gogi kernel: IOInitialize()
> May 11 21:38:54 gogi kernel: MotorInitialize()
> May 11 21:38:54 gogi kernel: AsicID = 0x77
> May 11 21:38:54 gogi kernel: ptdrvClose()
> May 11 21:38:54 gogi kernel: MiscRestorePort()
> May 11 21:38:54 gogi kernel: - no need to restore portmode !
> May 11 21:38:54 gogi kernel: Releasing parport
> May 11 21:38:54 gogi kernel: ptdrvShutdown()
> May 11 21:38:54 gogi kernel: cleanup device 0
> May 11 21:38:54 gogi kernel: Lamp-Timer stopped !
> May 11 21:38:54 gogi kernel: Try to claim the parport
> May 11 21:38:54 gogi kernel: Releasing parport
> May 11 21:38:54 gogi kernel: Port unregistered
> May 11 21:38:54 gogi kernel: pt_drv: init failed - ret = -9020
> May 11 21:38:54 gogi kernel: ---------------------------------------------
> May 11 21:38:55 gogi kernel: *********************************************
> May 11 21:38:55 gogi kernel: pt_drv: init_module()
> May 11 21:38:55 gogi kernel: pt_drv : driver version = 0.36-38
> May 11 21:38:55 gogi kernel: ptdrvInit(0)
> May 11 21:38:55 gogi kernel: Init settings done
> May 11 21:38:55 gogi kernel: ScanData = 0xc3d58000
> May 11 21:38:55 gogi kernel: Requested port at 0x378
> May 11 21:38:55 gogi kernel: Requested port (0x378) found
> May 11 21:38:55 gogi kernel: Port mode reported: (0x0047)
> May 11 21:38:55 gogi kernel: Port for device 0 registered
> May 11 21:38:55 gogi kernel: ptdrvOpen(port=0x378)
> May 11 21:38:55 gogi kernel: Try to claim the parport
> May 11 21:38:55 gogi kernel: Using EPP-mode
> May 11 21:38:55 gogi kernel: Starting Scanner-Autodetection
> May 11 21:38:55 gogi kernel: ************ DETECTP48xx ************
> May 11 21:38:55 gogi kernel: ModelSet4800()
> May 11 21:38:55 gogi kernel: modelInitPageSettings()
> May 11 21:38:55 gogi kernel: A4 set
> May 11 21:38:55 gogi kernel: ModelSet4800() done.
> May 11 21:38:55 gogi kernel: P48xxInitAsic()
> May 11 21:38:55 gogi kernel: DacInitialize()
> May 11 21:38:55 gogi kernel: ImageInitialize()
> May 11 21:38:55 gogi kernel: IOInitialize()
> May 11 21:38:55 gogi kernel: MotorInitialize()
> May 11 21:38:55 gogi kernel: Dataport = 0x0378
> May 11 21:38:55 gogi kernel: Ctrlport = 0x037a
> May 11 21:38:55 gogi kernel: Test 0x55
> May 11 21:38:55 gogi kernel: Test 0xAA
> May 11 21:38:55 gogi kernel: Compare data=0xfe and status=0xfe, port=0x378
> May 11 21:38:55 gogi kernel: detectScannerConnection() returns -9021.
> May 11 21:38:55 gogi kernel: ************ DETECTP9636 ************
> May 11 21:38:55 gogi kernel: ModelSet9636()
> May 11 21:38:55 gogi kernel: ModelSet9360()
> May 11 21:38:55 gogi kernel: modelInitPageSettings()
> May 11 21:38:55 gogi kernel: A4 set
> May 11 21:38:55 gogi kernel: ModelSet9630() done.
> May 11 21:38:55 gogi kernel: modelInitPageSettings()
> May 11 21:38:55 gogi kernel: A4 set
> May 11 21:38:55 gogi kernel: ModelSet9636() done.
> May 11 21:38:55 gogi kernel: P9636InitAsic()
> May 11 21:38:55 gogi kernel: DacInitialize()
> May 11 21:38:55 gogi kernel: ImageInitialize()
> May 11 21:38:55 gogi kernel: IOInitialize()
> May 11 21:38:55 gogi kernel: MotorInitialize()
> May 11 21:38:55 gogi kernel: AsicID = 0x77
> May 11 21:38:55 gogi kernel: ptdrvClose()
> May 11 21:38:55 gogi kernel: MiscRestorePort()
> May 11 21:38:55 gogi kernel: - no need to restore portmode !
> May 11 21:38:55 gogi kernel: Releasing parport
> May 11 21:38:55 gogi kernel: ptdrvShutdown()
> May 11 21:38:55 gogi kernel: cleanup device 0
> May 11 21:38:55 gogi kernel: Lamp-Timer stopped !
> May 11 21:38:55 gogi kernel: Try to claim the parport
> May 11 21:38:55 gogi kernel: Releasing parport
> May 11 21:38:55 gogi kernel: Port unregistered
> May 11 21:38:55 gogi kernel: pt_drv: init failed - ret = -9020
> May 11 21:38:55 gogi kernel: ---------------------------------------------
>
> When doing a modprobe pt_drv or scanimage -L I get something like this:
> May 12 16:15:52 gogi kernel: pt_drv_open()
> May 12 16:15:52 gogi kernel: ioctl(_PTDRV_OPEN_DEVICE)
> May 12 16:15:52 gogi kernel: Lamp-Timer stopped !
> May 12 16:15:52 gogi kernel: Init settings done
> May 12 16:15:52 gogi kernel: ptdrvOpen(port=0x0)
> May 12 16:15:52 gogi kernel: Try to claim the parport
> May 12 16:15:52 gogi kernel: Using EPP-mode
> May 12 16:15:52 gogi kernel: Starting Scanner-detection for P9636
> May 12 16:15:52 gogi kernel: ************ DETECTP9636 ************
> May 12 16:15:52 gogi kernel: ModelSet9636()
> May 12 16:15:52 gogi kernel: ModelSet9360()
> May 12 16:15:52 gogi kernel: modelInitPageSettings()
> May 12 16:15:52 gogi kernel: A4 set
> May 12 16:15:52 gogi kernel: ModelSet9630() done.
> May 12 16:15:52 gogi kernel: modelInitPageSettings()
> May 12 16:15:52 gogi kernel: A4 set
> May 12 16:15:52 gogi kernel: ModelSet9636() done.
> May 12 16:15:52 gogi kernel: P9636InitAsic()
> May 12 16:15:52 gogi kernel: DacInitialize()
> May 12 16:15:52 gogi kernel: ImageInitialize()
> May 12 16:15:52 gogi kernel: IOInitialize()
> May 12 16:15:52 gogi kernel: MotorInitialize()
> May 12 16:15:52 gogi kernel: AsicID = 0x77
> May 12 16:15:55 gogi kernel: pt_drv_close()
> May 12 16:15:55 gogi kernel: ptdrvClose()
> May 12 16:15:55 gogi kernel: Releasing parport
>
>
>
> Thanks in advance
>
> Georg Moeser
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: ####@####.####
> For additional commands, e-mail: ####@####.####
