plustek: Plustek 9636T Problems
Subject:
Re: Plustek 9636T Problems
From:
"Jaeger, Gerhard" ####@####.####
Date:
28 Jun 2001 17:24:22 -0000
Message-Id: <01062819270300.00728@ruebennase>
Hi John,
well first of all: What you've done was correct!
The only thing is: You don't need the mov=4 switch, for the OP9636
it should be mov=0 (which is the default)
After trying to load the driver, you should have loaded
parport and parport_pc
It is quite strange, that depmod couldn't find the functions
best_memcpy etc..
Kevin - didn't you already had that problem last year???
Well I remember that there was such a problem, but I could
not remember the solution.
I will check the list...
Gerhard
On Wednesday, 27. June 2001 03:50, John C. Hollemans wrote:
> _____
> Hello,
>
> I am stumped after reading all docs available and running into
> "unresolved symbols" messages. My problem occurs while attempting to
> build the sane system to drive my Plustek 9636T :
>
> System is Red Hat Linux 6.2, running kernel 2.2.14-5.0. Sources are
> sane-backends-1.0.4, and plustek-sane-0_39_3. Performed following steps
> as root per installation instructions in plustek driver source files:
> 1) cd /tmp
> 2) mkdir sane, put sane-backends-1.0.4.tar.gz and
> plustek-sane-0_39_3.tar.gz in /tmp/sane
> 3) cd sane/
> 4) unpack sane-backends-1.0.4.tar.gz
> 5) cp plustek-sane-0_39_3.tar.gz
> 6) cd sane-backends-1.0.4/
> 7) unpack plustek-sane-0_39_3.tar.gz
> 8) ./configure (no errors)
> 9) make (no errors)
> 10) make install (no errors)
> 11) cd backend/plustek_driver/
> 12) make (no errors)
> 13) make install (no errors)
> 14) modify /etc/conf.modules to include:
> alias char-major-40 pt_drv
> pre-install pt_drv modprobe -k parport
> options pt_drv lampoff=180 warmup=15 port=0x378 lOffonEnd=0 mov=4
> slowIO=0 forceMode=0
> 15) depmod -av (depmod: *** Unresolved symbols in
> /lib/modules/2.2.14-5.0/misc/pt_drv.o
> /lib/modules/2.2.14-5.0/misc/pt_drv.o)
> 16) make load
> /sbin/modprobe pt_drv || exit 1
> /lib/modules/2.2.14-5.0/misc/pt_drv.o: unresolved symbol
> parport_unregister_device
> /lib/modules/2.2.14-5.0/misc/pt_drv.o: unresolved symbol
> parport_enumerate
> /lib/modules/2.2.14-5.0/misc/pt_drv.o: unresolved symbol best_memcpy
> /lib/modules/2.2.14-5.0/misc/pt_drv.o: unresolved symbol
> parport_register_device
> /lib/modules/2.2.14-5.0/misc/pt_drv.o: unresolved symbol best_memset
> /lib/modules/2.2.14-5.0/misc/pt_drv.o: unresolved symbol parport_claim
> /lib/modules/2.2.14-5.0/misc/pt_drv.o: unresolved symbol
> best_copy_to_user
> /lib/modules/2.2.14-5.0/misc/pt_drv.o: unresolved symbol
> best_copy_from_user
> /lib/modules/2.2.14-5.0/misc/pt_drv.o: unresolved symbol parport_release
> /lib/modules/2.2.14-5.0/misc/pt_drv.o: insmod
> /lib/modules/2.2.14-5.0/misc/pt_drv.o failed
> /lib/modules/2.2.14-5.0/misc/pt_drv.o: insmod pt_drv failed
> make: *** [load] Error 1
>
> The /etc/modules.conf contains:
> # cat /etc/conf.modules
> alias eth0 ne2k-pci
> alias parport_lowlevel parport_pc
> alias sound-slot-0 es1371
> alias char-major-40 pt_drv
> pre-install pt_drv modprobe -k parport
> options pt_drv lampoff=180 warmup=15 port=0x378 lOffonEnd=0 mov=4
> slowIO=0 forceMode=0
>
> What have i missed ??? Rebooting does not solve the problem.
>
> Thanks in advance.
>
> Regards / John
>
> --
> Message prepared: 18:00, 26/06/2001
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: ####@####.####
> For additional commands, e-mail: ####@####.####
