plustek: Primax 4800Direct
Subject:
Re: Primax 4800Direct
From:
"Jaeger, Gerhard" ####@####.####
Date:
25 Aug 2001 13:41:45 -0000
Message-Id: <01082515445903.00709@ruebennase>
Hi,
can you please enable the debug output of the driver:
- go to directory plustek_driver
- find the entry DEBUG=y in the Makefile
- uncomment this entry by removing the #
- recompile an reinstall the driver
- load it and try to use xscanimage
- send me the output of dmesg
Gerhard
On Saturday, 18. August 2001 12:18, NiElS wrote:
> LS,
>
> I was happy to find a driver for my scanner. However, it does not seem to
> work for me. Perhaps you can help.
>
> Normally the scanner driver load as:
>
> pt_drv : driver version 0.39-4
> pt_drv0: 600P/6000P found on port 0x0378
> pt_drv0: Lamp-Timer set to 180 seconds.
> pt_drv0: WarmUp period set to 30 seconds.
> pt_drv0: Lamp untouched on driver unload.
>
> When I follow documentation and load with mov=2 it loads as:
>
> pt_drv : driver version 0.39-4
> pt_drv0: Primax 4800 Direct found on port 0x0378
> pt_drv0: Lamp-Timer set to 180 seconds.
> pt_drv0: WarmUp period set to 30 seconds.
> pt_drv0: Lamp untouched on driver unload.
>
> When I do a scanimage -T (or -L) I get:
>
> [sanei_debug] Setting debug level of plustek to 12.
> [plustek] sane_init: sane-backends 1.0.5
> [plustek] sane_init, ># Plustek-SANE Backend configuration file<
> [plustek] sane_init, >#<
> [plustek] sane_init, ># for multiple devices use<
> [plustek] sane_init, ># /dev/pt_drv0<
> [plustek] sane_init, ># /dev/pt_drv1<
> [plustek] sane_init, ># /dev/pt_drv2<
> [plustek] sane_init, >#<
> [plustek] sane_init, ><
> [plustek] sane_init, >/dev/pt_drv0<
> [plustek] sane_init, >/dev/pt_drv0<
> [plustek] attach_one: >/dev/pt_drv0<
> [plustek] attach (/dev/pt_drv0, (nil))
> [plustek] drvopen()
> [plustek] Scanner information:
> [plustek] Model : Primax 4800 Direct
> [plustek] Asic : 0x10
> [plustek] Flags : 0x00000006
> [plustek] Version: 0x00000027
> [plustek] drvclose()
>
> here it now hangs an the motor makes a noise like it cant go any further.
> when I disconnect the cable scanimage will continue with:
>
> [plustek] attach: model = >Primax 4800 Direct<
> [plustek] sane_get_devices (0xbffff848, 0)
> [plustek] sane_open - /dev/pt_drv0
> [plustek] sane_start
> [plustek] drvopen()
> [plustek] ioctl PT_DRV_OPEN_DEVICE failed(-9021)
> [plustek] sane_start: open failed: 2
> scanimage: sane_start: Error during device I/O
> [plustek] sane_cancel
> [plustek] sane_close
> [plustek] sane_exit
>
> Any ideas on what the problem is?
>
> Thanks,
> NiElS
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: ####@####.####
> For additional commands, e-mail: ####@####.####
