plustek: Loading problem
Subject:
Loading problem
From:
Michael Towler ####@####.####
Date:
25 Jul 2000 01:47:08 -0000
Message-Id: <Pine.OSF.3.96.1000725024019.789A-100000@tcm2.phy.cam.ac.uk>
Hello,
Problems with:
Mandrake 7.0
Plustex Optic Pro 9636P scanner
Sane 1.0.2 with plustek-sane-0_36_16.tar.gz
Followed instructions in the plustex-sane INSTALL file. Got as far as
'make load' whereupon this happens:
/sbin/modprobe pt_drv || exit 1
/lib/modules/2.2.14-15mdk/misc/pt_drv.o: unresolved symbol
parport_unregister_device
/lib/modules/2.2.14-15mdk/misc/pt_drv.o: unresolved symbol
parport_enumerate
/lib/modules/2.2.14-15mdk/misc/pt_drv.o: unresolved symbol
parport_register_device
/lib/modules/2.2.14-15mdk/misc/pt_drv.o: unresolved symbol parport_claim
/lib/modules/2.2.14-15mdk/misc/pt_drv.o: unresolved symbol parport_release
make: *** [load] Error 1
Recompiled with debug flag on.
Output from dmesg included below signature below.
I'd be grateful if anyone could help with this?
Best regards,
Mike
-------------------------------------------------------------------------
Dr. Mike Towler ####@####.#### Theory of Condensed Matter (Rm 524)
Cavendish Laboratory, University of Cambridge, Cambridge CB3 0HE, UK
Tel. +44-(0)1223-337459 Fax. +44-(0)1223-337356
----------------WWW: http://www.tcm.phy.cam.ac.uk/~mdt26/ ---------------
Linux version 2.2.14-15mdk ####@####.#### (gcc version
2.95.2 1
9991024 (release)) #1 Tue Jan 4 22:24:20 CET 2000
Detected 122358054 Hz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 48.84 BogoMIPS
Memory: 71136k/73728k available (1092k kernel code, 416k reserved, 1020k
data,
64k init, 0k bigmem)
Dentry hash table entries: 262144 (order 9, 2048k)
Buffer cache hash table entries: 131072 (order 7, 512k)
Page cache hash table entries: 32768 (order 5, 128k)
VFS: Diskquotas version dquot_6.4.0 initialized
CPU: Intel Pentium 75 - 200 stepping 06
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
Intel Pentium with F0 0F bug - workaround enabled.
POSIX conformance testing by UNIFIX
PCI: BIOS32 entry (0xc00fd670) in high memory, cannot use.
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
TCP: Hash tables configured (ehash 131072 bhash 65536)
Initializing RT netlink socket
Starting kswapd v 1.5
Detected PS/2 Mouse Port.
Serial driver version 4.27 with MANY_PORTS MULTIPORT SHARE_IRQ enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
pty: 256 Unix98 ptys configured
apm: BIOS version 1.1 Flags 0x02 (Driver version 1.9)
Real Time Clock Driver v1.09
RAM disk driver initialized: 16 RAM disks of 4096K size
PIIX3: IDE controller on PCI bus 00 dev 09
PIIX3: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1020-0x1027, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0x1028-0x102f, BIOS settings: hdc:pio, hdd:pio
hda: Conner Peripherals 1620MB - CFS1621A, ATA DISK drive
hdc: COMPAQ CRD-256P, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: Conner Peripherals 1620MB - CFS1621A, 1548MB w/0kB Cache,
CHS=786/64/63
hdc: ATAPI 6X CD-ROM drive, 128kB Cache
Uniform CDROM driver Revision: 2.56
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
md driver 0.90.0 MAX_MD_DEVS=256, MAX_REAL=12
raid5: measuring checksumming speed
8regs : 107.061 MB/sec
32regs : 81.915 MB/sec
using fastest function: 8regs (107.061 MB/sec)
scsi : 0 hosts.
scsi : detected total.
md.c: sizeof(mdp_super_t) = 4096
Partition check:
hda: hda1 hda2 hda3 hda4
autodetecting RAID arrays
autorun ...
... autorun DONE.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 64k freed
Adding Swap: 34268k swap-space (priority -1)
CSLIP: code copyright 1989 Regents of the University of California
PPP: version 2.3.7 (demand dialling)
PPP line discipline registered.
registered device ppp0
