plustek: problems with tce-s440(plustek,supported)
Subject:
problems with tce-s440(plustek,supported)
From:
Louco.comvocê na ####@####.####
Date:
29 Oct 2001 00:36:37 -0000
Message-Id:
When i try to load the module:
# modprobe pt_drv
or
# make load
I've got this error:
root@loko:/usr/src/sane# modprobe pt_drv
/lib/modules/2.4.12-ac2/misc/pt_drv.o: init_module: Success
/lib/modules/2.4.12-ac2/misc/pt_drv.o: Hint: insmod errors can be caused by
incorrect
module parameters, including invalid IO or IRQ parameters
/lib/modules/2.4.12-ac2/misc/pt_drv.o: insmod
/lib/modules/2.4.12-ac2/misc/pt_drv.o failed
/lib/modules/2.4.12-ac2/misc/pt_drv.o: insmod pt_drv failed
Like the device does not exist! And in my logs the message:
Oct 27 17:26:35 loko kernel: pt_drv : driver version 0.39-8
Oct 27 17:26:35 loko kernel: pt_drv : no device(s) detected, (-9020)
My paralel port is configured in bios in epp mode(0x378,irq7), my printer
(epson lx300) is perfect with this.
I try'd to change the paralen port to spp, but the problem persists.
Whats going wrong?
My box is an k6-3-400 with 128mb ram, mb fic 503a, with slack8 and kernel
2.4.12-ac2. I tryed with kernel 2.2.19 too.
Thank you.
--------------------------------------------------------------------------
_o)(o_ LOUCURA, LOUCURA, LOUCURA!!!
-./\\//\.- Foi difícil mas escolhi o duelo de pinguins, hehe.
_\_VV_/_ DUELO TOTAL! Sem noção joselito, sem noção!
--------------------------------------------------------------------------
