plustek: sane -plustek backend usb
Subject:
Re: sane -plustek backend usb
From:
"Jaeger, Gerhard" ####@####.####
Date:
23 Jan 2002 20:10:04 -0000
Message-Id: <16TTea-1nBX3gC@fmrl02.sul.t-online.com>
Well, this is a known issue! Plusteks' naming convention is not that clear.
It covers several technical different models by one name.
The only UT12 ths is and will be supported is the 0x0017 with a
LM9832 chip.
The 0x0001 uses a Grandtech chipset, which is currently not supported
by any backend (but I think there's some work in progress)
Cheers
Gerhard
On Wednesday, 23. January 2002 00:24, Uwe Koch wrote:
> I've recently downloaded your Plustek USB SANE Backend to use it with
> OPTICPRO U12 and found out that I got a different model from that which
> is mentioned on the SANE-PLUSTEK-USB Backend page.
> My Model is VENDOR=0x07b3 PRODUCT=0x0001
> This model does not work with this backend (version 1.0.6)
> I hope this Information is helpful for your work.
> If you have any suggestions to get this scanner to work, I would be very
> thankful....
>
>
> Greetings Uwe Koch
