plustek: Device or resource busy
Subject:
Device or resource busy
From:
"Michael Hofmann" ####@####.####
Date:
11 Aug 2000 09:10:31 -0000
Message-Id: <3993C360.F9419293@gmx.net>
Hi,
I have tried to set up the driver for my 9636P with sane-1.0.1, however
I always get this error message:
[root@Alfred plustek_driver]# make load
/sbin/modprobe pt_drv || exit 1
/lib/modules/2.2.14/misc/pt_drv.o: init_module: Device or resource busy
parport: Device or resource busy
make: *** [load] Error 1
As suggested in a previous post I have enbled the debug switch in the
makefile. Attached see the relevant output part of dmesg. The
distribution is RedHat6.1.
What am I doing wrong?
Suggestions anyone?
TIA,
Michael
*********************************************
pt_drv: init_module()
ptdrvInit(0)
Init settings done
ScanData = 0xc3bb8000
Requested port at 0x378
Requested port (0x378) found
Port mode reported: (0x0079)
Port registered
ptdrvOpen(port=0x378)
Try to claim the parport
Using SPP-mode
Attempting to set EPP from ECP mode.
Port is set to (ECP) EPP mode.
Starting Scanner-Autodetection
************ DETECTP48xx ************
ModelSet4800()
modelInitPageSettings()
A4 set
ModelSet4800() done.
P48xxInitAsic()
DacInitialize()
ImageInitialize()
IOInitialize()
MotorInitialize()
Test 0x55
Test 0xAA
Compare data=0xde and status=0x5e, port=0x378
p48xxReadWriteTest()
Can't find your model, asic = 0x5a
detectScannerConnection() returns -9020.
************ DETECTP9636 ************
ModelSet9636()
ModelSet9360()
modelInitPageSettings()
A4 set
ModelSet9630() done.
modelInitPageSettings()
A4 set
ModelSet9636() done.
P9636InitAsic()
DacInitialize()
ImageInitialize()
IOInitialize()
MotorInitialize()
AsicID = 0x81
Test 0x55
Test 0xAA
Compare data=0xde and status=0x1e, port=0x378
p9636ReadWriteTest()
Error in memory test at pos 72 (72 != 76)
detectScannerConnection() returns -9020.
ptdrvClose()
MiscRestorePort()
Releasing parport
ptdrvShutdown()
pt_drv: init failed - ret = -9020
---------------------------------------------
