plustek: Device or resource busy
Subject:
Re: Device or resource busy
From:
####@####.#### (G. Jaeger)
Date:
11 Aug 2000 09:50:37 -0000
Message-Id: <13NBTk-2HKJQuC@fwd06.sul.t-online.com>
Hi Michael,
it seems there's a problem with the parallel port.
Try to set this port (in the BIOS) to EPP or SPP
and test again.
When looking at the debug-messages, your
scanner has been found, but the memory
test fails. So there are two possibilities:
- The parallelport settings are not ok.
- The scanner is out of order
One question: Is the scanner an OP9636P Turbo?
Gerhard
----------------------------------------
####@####.####
----------------------------------------