plustek: Device or resource busy
Subject:
Re: Device or resource busy
From:
Michael Hofmann ####@####.####
Date:
11 Aug 2000 11:46:14 -0000
Message-Id: <3993E7DD.A50ABB92@gmx.net>
Hi Gerhard,
"G. Jaeger" wrote:
>
> Hi Michael,
>
> it seems there's a problem with the parallel port.
> Try to set this port (in the BIOS) to EPP or SPP
> and test again.
I set it to EPP/SPP and thereafter to SPP only, no go. Same error occurs
both ways.
> When looking at the debug-messages, your
> scanner has been found, but the memory
> test fails. So there are two possibilities:
>
> - The parallelport settings are not ok.
> - The scanner is out of order
I just crosschecked with Windows, the scanner works fine.
> One question: Is the scanner an OP9636P Turbo?
Not that I know of. It's a used one, so I'm not perfectly sure, but it
doesn't say Turbo anywhere on it. The scan speed (in Windows) doesn't
imply it's a Turbo either... :-)
Is there anything else I can do?
Regards,
Michael
