[<<] [<] Page 1 of 2 [>] [>>] | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Subject:
Re: [gnupic] Olimex PG2C programmer
From: "John Chubick" ####@####.#### Date: 31 Mar 2006 00:59:25 +0100 Message-Id: <143d30ad0603301559x7ebaa2ebxf08a7616a7f1a145@mail.gmail.com> I've used the PG2C almost exclusively since I started pic programming about a year ago. It works very well with the PiKdev programmer but I've never used picprog. Isn't picprog a parallel port programmer? John On 3/30/06, Maxim Wexler ####@####.#### wrote: > > Hi group, > > after some searching I've decided to buy this programmer. > > Has somebody used it w/ picprog and can give a report? > > -Maxim > > | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Subject:
Re: [gnupic] Olimex PG2C programmer
From: "Maxim Wexler" ####@####.#### Date: 31 Mar 2006 01:27:58 +0100 Message-Id: <a0811460603301627k37a371b2nd4362d8c12076be@mail.gmail.com> On 3/30/06, John Chubick ####@####.#### wrote: > > I've used the PG2C almost exclusively since I started pic programming > about > a year ago. It works very well with the PiKdev programmer but I've never > used picprog. Isn't picprog a parallel port programmer? > > John not according to http://hyvatti.iki.fi/~jaakko/pic/picprog.html On 3/30/06, Maxim Wexler ####@####.#### wrote: > > > > Hi group, > > > > after some searching I've decided to buy this programmer. > > > > Has somebody used it w/ picprog and can give a report? > > > > -Maxim > > > > > > | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Subject:
Re: [gnupic] Olimex PG2C programmer
From: Wayne Topa ####@####.#### Date: 31 Mar 2006 03:35:41 +0100 Message-Id: <20060331023310.GC30992@intergate.com> Maxim ####@####.#### is reported to have said: > Hi group, > > after some searching I've decided to buy this programmer. > > Has somebody used it w/ picprog and can give a report? > I have been using the PG2C for 4-5 Months now. It works fine with picprog 1.7 but not with the latest, 1.8, release. I have had no problems with it. Has to be run by root or sudo. Mice software. Wayne -- USER, n.: The word computer professionals use when they mean "idiot." -- Dave Barry, "Claw Your Way to the Top" _______________________________________________________ | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Subject:
Re: [gnupic] Olimex PG2C programmer
From: Jan Wagemakers ####@####.#### Date: 31 Mar 2006 15:20:30 +0100 Message-Id: <20060331142026.GB2681@qwerty.be> Wayne Topa ####@####.#### schreef: > Maxim ####@####.#### is reported to have said: >> after some searching I've decided to buy this programmer. >> Has somebody used it w/ picprog and can give a report? > I have been using the PG2C for 4-5 Months now. It works fine with > picprog 1.7 but not with the latest, 1.8, release. 1.8.1 is the latest ;-) Can you tell which problems you have with 1.8? > Has to be run by root or sudo. I use picprog as a normal user. -- Met vriendelijke groetjes - Jan Wagemakers - ... It is better to watch things than to do them. --Homer Simpson | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Subject:
Re: [gnupic] Olimex PG2C programmer
From: Jan Wagemakers ####@####.#### Date: 31 Mar 2006 15:24:46 +0100 Message-Id: <20060331142445.GC2681@qwerty.be> John Chubick ####@####.#### schreef: > Isn't picprog a parallel port programmer? pts/7 jan ~$ dpkg -s picprog Package: picprog [cut] Description: Microchip PIC serial programmer software This is Picprog, a Microchip PIC microcontroller programmer software for a simple serial port device. . homepage: http://www.iki.fi/hyvatti/pic/picprog.html pts/7 jan ~$ -- Met vriendelijke groetjes - Jan Wagemakers - ... RFS: picprog: Microchip PIC serial programmer software (GPL) Deb-package is available at <http://www.janw.easynet.be/picprog.html> | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Subject:
Re: [gnupic] Olimex PG2C programmer
From: Wayne Topa ####@####.#### Date: 31 Mar 2006 18:30:59 +0100 Message-Id: <20060331040805.GD30992@intergate.com> Wayne ####@####.#### is reported to have said: > Maxim ####@####.#### is reported to have said: > > Hi group, > > > > after some searching I've decided to buy this programmer. > > > > Has somebody used it w/ picprog and can give a report? > > > > I have been using the PG2C for 4-5 Months now. It works fine with > picprog 1.7 but not with the latest, 1.8, release. I have had no > problems with it. > > Has to be run by root or sudo. Mice software. ^ Nice WT -- It works! Now if only I could remember what I did... _______________________________________________________ | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Subject:
Re: [gnupic] Olimex PG2C programmer
From: Wayne Topa ####@####.#### Date: 31 Mar 2006 20:11:19 +0100 Message-Id: <20060331190708.GA8949@intergate.com> Jan ####@####.#### is reported to have said: > Wayne Topa ####@####.#### schreef: > > > Maxim ####@####.#### is reported to have said: > > >> after some searching I've decided to buy this programmer. > >> Has somebody used it w/ picprog and can give a report? > > I have been using the PG2C for 4-5 Months now. It works fine with > > picprog 1.7 but not with the latest, 1.8, release. > > 1.8.1 is the latest ;-) > > Can you tell which problems you have with 1.8? > > > Has to be run by root or sudo. > > I use picprog as a normal user. Sure. In both the tar.gz and the .deb, it does not communicate with the PG2C, yet does fine with version 1.7, same cable and computer. I wrote to the author and tried a number of his suggestions but found nothing that corrected the non-communication problem. As 1.7 works OK, I hope that more reports about the picprog-1.8/PG2C combination might help in finding if the problem is here or with the new version. Wayne -- It is easier to write an incorrect program than understand a correct one. _______________________________________________________ | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Subject:
Re: [gnupic] Olimex PG2C programmer
From: Wayne Topa ####@####.#### Date: 31 Mar 2006 20:11:31 +0100 Message-Id: <20060331190935.GB8949@intergate.com> John ####@####.#### is reported to have said: > I've used the PG2C almost exclusively since I started pic programming about > a year ago. It works very well with the PiKdev programmer but I've never > used picprog. Isn't picprog a parallel port programmer? > John Did you do anything special to get the PG2C working with pikdev? I tried all of the JDM options and can't get to to communicate. Wayne -- Windows 3.1 not found: (C)heer, (P)arty, (D)ance? _______________________________________________________ | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Subject:
Re: [gnupic] Olimex PG2C programmer
From: Jan Wagemakers ####@####.#### Date: 31 Mar 2006 20:39:07 +0100 Message-Id: <20060331193858.GA17094@qwerty.be> Wayne Topa ####@####.#### schreef: >>> I have been using the PG2C for 4-5 Months now. It works fine with >>> picprog 1.7 but not with the latest, 1.8, release. >> Can you tell which problems you have with 1.8? > Sure. In both the tar.gz and the .deb, it does not communicate with > the PG2C, yet does fine with version 1.7, same cable and computer. > I wrote to the author and tried a number of his suggestions but found > nothing that corrected the non-communication problem. > As 1.7 works OK, I hope that more reports about the picprog-1.8/PG2C > combination might help in finding if the problem is here or with the > new version. Strange, I know someone[1] who makes use of a Olimex PG1 with picprog-1.8 without a problem. And the schematic of a PG1 and PG2[2] is not very different. Oh well, the strange world of bits and bytes ;-) [1] <http://groups.google.com/group/wisclub/msg/cae2e21f3dad0c6b> [2] <http://www.olimex.com/dev/images/pic-pg1-sch.gif> <http://www.olimex.com/dev/images/pic-pg2c-sch.gif> -- Met vriendelijke groetjes - Jan Wagemakers - ... Oh, so they have internet on computers now! --Homer Simpson | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Subject:
Re: [gnupic] Olimex PG2C programmer
From: "John Chubick" ####@####.#### Date: 1 Apr 2006 03:27:46 +0100 Message-Id: <143d30ad0603311826m728b37d1xcb979a66f052ef1a@mail.gmail.com> I don't recall doing anything "special". Here are my settings on the Programmer configuration panel: Serial /dev/ttyS1 Vpp pin3 Vdd pin5 Clock pin7 Data in pin8 Data out pin4 Data R/W pin5 Clock delay 20 That's it...no inverted options checked, etc... I think these correspond to selecting JDM Class (delay 20) from the drop down. Make sure you've selected the proper serial port. Oh, and the other thing I found I had to do was chmod 777 /dev/ttyS1 as root to give normal users write privileges to the serial port. Hope this helps. John On 3/31/06, Wayne Topa ####@####.#### wrote: > > John ####@####.#### is reported to have said: > > I've used the PG2C almost exclusively since I started pic programming > about > > a year ago. It works very well with the PiKdev programmer but I've never > > used picprog. Isn't picprog a parallel port programmer? > > > John > > Did you do anything special to get the PG2C working with pikdev? > > I tried all of the JDM options and can't get to to communicate. > > Wayne > > -- > Windows 3.1 not found: (C)heer, (P)arty, (D)ance? > _______________________________________________________ > > --------------------------------------------------------------------- > To unsubscribe, e-mail: ####@####.#### > For additional commands, e-mail: ####@####.#### > > | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
[<<] [<] Page 1 of 2 [>] [>>] |